Ryobi RTS10G User Manual - Page 10
Features, Tools Needed - switch key
View all Ryobi RTS10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
FEATURES SELF-RETRACTING LOWER BLADE GUARD The lower blade guard is made of shock-resistant, seethrough plastic that provides protection from each side of the blade. It retracts over the upper blade guard as the saw is lowered into the workpiece. SPINDLE LOCK BUTTON The spindle lock button locks the spindle stopping the blade from rotating. Depress and hold the lock button while installing, changing, or removing blade. SWITCH TRIGGER The saw will not start until you depress the switch lock with your thumb then squeeze the switch trigger. To prevent unauthorized use of the compound miter saw, disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock (not included) through the hole in the switch trigger. A lock with a long shackle of 5/16 in. diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location. SPINDLE LOCK BUTTON SWITCH TRIGGER SWITCH TRIGGER Fig. 4 PADLOCK Fig. 5 TOOLS NEEDED The following tool (not included) is needed for making adjustments or installing the blade: SQUARE COMBINATION SQUARE 10 Fig. 6