Samsung 570DX User Manual (user Manual) (ver.1.0) (English) - Page 62

2) Interval [MENU ENTER ENTER ENTER ENTER] Determines the time interval to run the Screen Scroll operation. (1~10 Hour) The time is calculated on the basis of the power on time. By default, the time is set to 10 hours. - 1~10 Hour 3) Second [MENU ENTER ENTER ENTER ENTER] Determines the time period to run the Screen Scroll operation. (1~5 Second) By default, the time is set to 5 seconds. - Type-Scroll : 1~5 Second - Type-Pixel, Bar, Eraser : 10~50 Second 4) Type [MENU ENTER ENTER ENTER ENTER] You can change the Safety Screen Type. - Scroll - Pixel - Bar - Eraser Resolution Select [MENU ENTER ENTER ENTER] When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1920 x 1080 @ 60Hz or 1366 x768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Available in PC/BNC mode only 1) Off 2) 1024 X 768 3) 1280 X 768 4) 1920 x 1080 5) 1366 X 768 Note • Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1920 x 1080 @ 60Hz or 1366 x768 @ 60Hz. Lamp Control [MENU ENTER ENTER] → [ENTER ENTER] Adjusts the inverter lamp in order to reduce energy consumption. Note • This function does not operate when Dynamic Contrast is set to On in AV, S-Video, Component, and DVI- Video modes. Power On Adjustment [MENU ENTER ENTER] → [ENTER ENTER] Adjusts the Power On time for the screen. *Caution: Set the Power On time to be loger to avoid overvoltage. DVI Source