Samsung BD-E5300 User Manual Ver.1.0 (English) - Page 12

Setup Menu Navigation The Initial Settings Procedure 111 Turn on your TV after connecting the player, and then turn on the player. When you turn on the player for the first time, the player displays the Language screen. Initial Settings I On-Screen Language Select a language for the on-screen displays. English Français Deutsch Español Italiano Nederlands > Move " Select 222 Use the ▲▼ buttons on the remote to select the desired language, and then press the ENTER button. The Start screen appears. 333 Press the ENTER button to select Start. The Aspect Ratio Screen appears. 444 Use the ▲▼ buttons to select an Aspect Ratio, and then press the ENTER button. The Network Settings screen appears. - When you select an Aspect ratio, its effect on your TV picture is described at the top of the screen. 555 Select Auto, and then press the ENTER button. If you do not have a home network, press the BLUE (D) button on your remote. You will go directly to the Home menu. 666 The Blu-ray player automatically verifies your wired network. When verification in complete, the screen displays "Your network is operating properly." Press the ENTER button. 777 The "Initial settings completed." message appears, and then the Home screen appears. - If you Blu-ray player does not connect to your network or you want to connect manually, go to Network Setup on page 16. ✎ NOTE ▪▪ The Home menu will not appear if you do not configure the initial settings except as noted below. ▪▪ If you press the BLUE (D) button during network setup, you can access the Home menu even if the network setup is not completed yet. ▪▪ When you return to the Home menu, the full screen mode is cancelled automatically. ▪▪ If you want to display the Initial Setting screen again to make changes, press the PLAY/PAUSE ( ) button on the front panel of the player for more than 5 seconds with no disc inserted. This resets the player to its default settings. ▪▪ If you use an HDMI cable to connect the player to an Anynet+(HDMI-CEC)-compliant Samsung TV and 1.) You have set the Anynet+(HDMICEC) feature set to On in both the TV and the player and 2.) You have set the TV to a language supported by the player, the player will select that language as the preferred language automatically. ▪▪ If you leave the player in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 25 minutes, the power will automatically turn off. 1 3 2 4 1 HOME Button : Press to move to the Home menu. 2 RETURN Button : Return to the previous menu. ENTER / DIRECTION Button : 3 Move the cursor or select an item. Activate the currently selected item. Confirm a setting. 4 EXIT Button : Press to exit the current menu. •• Home Menu 3 4 5 2 1 HD Movies CinemaNow PANDORA internet radio YouTube Videos 6 7 8 9 No Disc a Change Device d View Devices " Enter 0 1 Selects Videos. 2 Selects Netflix. 3 Selects Vudu HD Movies. 4 Selects CinemaNow. 5 Selects Pandora® Internet Radio. 6 Selects YouTube. 7 Selects Photos. 8 Selects Music. 9 Selects Settings. 0 Displays the buttons you can use on the remote to access functions. ✎ NOTE ▪▪ The Videos, Photos, and Music options require that you have an appropriate disc inserted into the player or a USB flash device attached to the player. ▪▪ The Netflix, Vudu, Cinema Now, Pandora, and YouTube options require a working Internet connection. Accessing the Settings Menu To access the Settings menu and sub-menus, follow these steps: 111 Press the POWER button. The Home Menu appears. 222 Press the ◄► buttons to select Settings, and then press the ENTER button. 333 Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. 444 Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 555 Press the EXIT button to exit the menu. ✎ NOTE ▪▪ The access steps may differ depending on the menu you selected. The OSD (On Screen Display) may change in this player after you upgrade the software version. 12