Samsung DVD-927 User Manual - Page 34

DVD SET-UP How to Set Up Surround Sound You can configure analog audio output as surround sound or stereo sound using the setup menu. If you've selected surround sound output, you should specify the status of your speaker system to hear surround sound suitable for your speaker system. For instance, setting up SURROUND Ex) SOUND audio output for a surround speaker system which has a center speaker. 1 Press the SET UP/MUTE Button when in Stop mode. 1 4 3 LAST MEMORY 5 65 2 Press the UP or DOWN Button to select SURROUND SOUND. 2 3 Press the ENTER Button. AC-3 Output Level Control When AC-3, 5,1 channel encoded discs are played, the sound volume of the analog output for each channel can be changed. 1.Press the VOL.CONTROL button during the PLAY mode. 2.Press the UP or DOWN button to move to the channel whose volume you wish to change. You can change the level by using the LEFT or RIGHT button. 4 Press the UP, DOWN, LEFT or RIGHT Buttons to select 'CENTER YES'. 5 Press the ENTER Button. •'CENTER YES' is selected and the screen returns to SETUP MENU. • Note If you've configured the digital audio out as PCM, the selection of 'SURROUND SOUND' will not work. •If you have only front left and right speakers, you should set center, surround, subwoofer to 'NO'. •If you have front left, front right and center speakers only, you should set the center to 'YES'. •If you have only front left, front right, center and surround speakers, you should set the center and surround to 'YES'. •If you have all speakers needed for AC-3, you should set the center, surround and subwoofer to 'YES'. •When you have configured the audio output as AC-3 and have set the CENTER of the surround sound to YES, you must have a center speaker connected to hear the dialogue. How to return to menu screen during set up. Press RETURN Button. 66