Samsung DVD-927 User Manual - Page 42

BASIC FUNCTIONS To Perform Time or Chapter Search 2' 1' LAST MEMORY 81 To playback from a preset time on the disc 1 Press TIME SEARCH Button. 1 Ex) To search for the 2 minute 30 second point of the track. 2 Set the time you want. •set 2, 3, 0 for two & half minutes 3 Press PLAY/PAUSE or ENTER Button. If you enter a wrong time; press CLEAR Button. •Then, the time will be erased and the display shows 00:00. You can then enter the number again. 2 LAST MEMORY • Note You can only set the time search for a track currently play- ing. If you set a time search that is longer than the track length, the disc will go the next track. •When playing the VCDs (Ver 1.1, Ver 2.0 menu off mode)and CDs, you can select and playback the desired track directly by pressing the number button. •When in VIDEO-CD 2.0 mode(menu on mode), To search desired title or chapter PROGRAM, REPEAT, TIME SEARCH, DISPLAY and 3 by pressing title or chapter number 1' Press the C Button for chapter number selection. •This function works with DVDs only. •"TITLE" or "CHAPTER" will flash on the front panel display. Ex) To move to chapter 3. 2' Press the RIGHT or LEFT Button for title or chapter selection and press the desired title or chapter number. When the number of chapters is more than 10 •press '0 / +10' button and then press the second number within 3 seconds. •If you want chapter no. 27, RESUME function are impossible. •Depending on the DVD, TIME SEARCH button may not work. What is a chapter ? This is a detailed section of a press '0 / +10' two times and then press '7'. movie. A title is usually comprised of many chapters. Depending on the disc, a chapter may be referred to under a different name. If you enter a wrong number, •press the correct number again. 82 BASIC FUNCTIONS