Samsung DVD-927 User Manual - Page 36

VIDEO CD How to play a VIDEO-CD Press your TV and Audio system Power buttons ON. 1 3 LAST MEMORY 69 TV/Audio Selection To select the video mode, press the TV/Video button on the TV. •Video mode may be marked as input. Select 'AUX' or 'CD' in function selection part of your Audio amplifier •Each audio amplifier is different. Please refer to your audio amplifier owner's manual. How to playback 1 Press the OPEN/CLOSE Button after pressing POWER Button. 2 Load the VIDEO-CD. •Power turns ON, the tray opens and the STANDBY indicator light goes out. •Load the disc label-side up. 3 Press PLAY/PAUSE Button. •The tray closes and playback begins. LAST MEMORY Do you want to stop playback? Do you want to stop playback for a moment ? STANDBY POWER DIMMER SKIP/SEARCH Press the STOP Button or OPEN/CLOSE Button. •If you press OPEN/CLOSE button, the tray opens after playback stops. LAST MEMORY Press PLAY/PAUSE Button. •Screen stops, no sound. OPEN/CLOSE To play again •Press PLAY/PAUSE Button again. • Note When play is stopped, the unit records the point where STOP was pressed (RESUME function). Press PLAY again, and play will resume from this point. When the tray is opened or STOP is pressed again, the RESUME function will be cleared. •When in VIDEO-CD 2.0 mode (menu on mode), PROGRAM, REPEAT, TIME SEARCH, DISPLAY and RESUME function are impossible. •If the unit is left in the STOP mode for more than one minute without any user interaction, a screensaver will be activated, and the TV screen will fade in and fade out repeatedly. Press PLAY button to resume normal play. •If the unit is left 30 minutes in pause mode during play or menu, it will shut off. 70