Samsung FPT5894 User Manual (ENGLISH) - Page 22

Memorizing the Channels Your Wireless Home AV Center can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source T V Channel Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the Wireless Home AV Center (i.e. an air or a cable system). 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► 2 Press the ENTER button select Antenna. Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button. Press the EXIT button to exit. Storing Channels in Memory (Automatic Method) Move Enter Return T V Channel Antenna : AAirir Auto Program Cable Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Move Enter Return T V Channel 2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. 3 Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button. ➢ Air: "Air" antenna signal. Cable: "Cable" antenna signal. Air+Cable: "Air" and "Cable" antenna signals. ➢ If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is connected to ANT 1 IN (AIR), select Air. ➢ If both ANT 1 IN and ANT 2 IN are connected, select Air + Cable. ➢ If you selected Air, then go to step 5. Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move Enter Return T V Auto Program Select the antennas to memorize. Air Start Cable Start Air + Cable Start 4 Press the ▲ or ▼ to select the correct analog signal cable system source among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital. ➢ STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. 5 The TV begins memorizing all available stations. If you want to stop Auto Programming, press the ENTER button. The Stop Auto Program? message will be displayed. Select Yes by pressing the ◄ or ► button. Press the EXIT button to exit. ➢ The TV must be connected to antenna/cable in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control. ➢ • All available DTV and analog channels are automatically stored in memory. • It takes approximately 3 to 10 minutes to memorize channels. Move Enter Return T V Auto Program Select the cable system. Analog STD Start HRC IRC Digital STD HRC IRC Move Enter Return Auto Program Auto Program in progress. Cable Channel 67 68 % Stop Enter Return Auto Program Stop Auto Program? RETURN Yes Move Enter 68 % No Return You can also press the AUTO PROG. button on the remote control to bring up the Auto Program menu. FAV.CH AUTO PROG. ADD/DEL English - 22