Samsung HT-C6930W User Manual (user Manual) (ver.2.0) (English) - Page 28

Connections Connecting Audio from External Components DIGITAL AUDIO IN HDMI IN HDMI OUT LAN COMPONENT OUT OPTICAL VIDEO OUT Optical Cable (not supplied) Set-Top Box OPTICAL Red VCR AUX White Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component. 2. Press the FUNCTION button to select D.IN input. • The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM ✎ NOTE  To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.  This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.  This system supports only DTS and Dolby Digital audio, MPEG audio (bit stream) is not supported. AUX : Connecting an External Analog Component Analog signal components such as a VCR. 1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component. • Be sure to match connector colors. 2. Press the FUNCTION button to select AUX input. • The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM ✎ NOTE  You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product. 28 English