Samsung HT-E350 User Manual - Page 22

Setup Ideal Center Speaker placement Test Tone Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : On ▶ Ideal Surround Speaker placement " Select ' Return mMove " Select ' Return Place all speakers within this circle. Df: The distance from Front Speaker Dc: The distance from Center Speaker Ds: The distance from Surround Speaker Setting the Center Speaker If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m Df and Dc Delay Time 00 ms 01 ms 02 ms 03 ms 04 ms 05 ms Setting the Surround Speaker If the distance of Dc is equal to or longer than the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m Ds and Dc Delay Time 00 ms 03 ms 06 ms 09 ms 12 ms 15 ms Use the Test Tone feature to check the speaker connections. • Press the _+ buttons to select On. • The test tone will be sent to Front Left ➞ Center ➞ Front Right ➞ Surround Right ➞ Surround Left ➞ Subwoofer in order. To stop the test tone, press the ENTER button. DRC (Dynamic Range Compression) This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. • You can select either Full, 6/8, 4/8, 2/8, off. AUDIO SYNC Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video • You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. ✎✎NOTE `` With PL II (Dolby Pro Logic II), the delay time may be different for each mode. `` With AC-3 , the delay time can be set between 00 and 15mSEC. `` The Center channel is only adjustable on 5.1 channel discs. 22 English