Samsung ML-3560 User Manual (ENGLISH) - Page 15

Selecting a Location, Installing the Toner Cartridge

Page 15 highlights

3 Pull the paper tray out of the printer and remove the packing tape and the packing material inside of the tray. Installing the Toner Cartridge 1 Open the top cover. Pull up on the handle to open the cover. Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the printer close to the edge of your desk or table. Clearance Space Front: 482.6 mm (enough space so that trays can be opened or removed) Back: 320 mm (enough space to allow opening of the rear output tray) Right: 100 mm (enough space for ventilation) Left: 100 mm (enough space for ventilation) 100mm (3.9in) 320mm(12.6in) 100mm (3.9in) 2 Remove the starter toner cartridge from its bag. CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridge package. They might scratch the drum of the cartridge. 3 Locate the sealing tape at the end of the toner cartridge. Carefully pull the tape completely out of the cartridge and discard it. 482.6mm(19in) NOTES: • The sealing tape should be longer than 60 cm when correctly removed. • Holding the toner cartridge, pull the sealing tape straight to remove it from the cartridge. Be careful not to cut the tape. If this happens, you cannot use the toner cartridge. • Refer to the helpful pictures on the cartridge wrapping paper. 2.2 Setting Up Your Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

Setting Up Your Printer
2.
2
3
Pull the paper tray out of the printer and remove the
packing tape and the packing material inside of the tray.
Selecting a Location
Select a level, stable place with adequate space for air
circulation. Allow extra space for opening covers and trays.
The area should be well-ventilated and away from direct
sunlight or sources of heat, cold, and humidity. Do not set the
printer close to the edge of your desk or table.
Clearance Space
Front
: 482.6 mm
(enough space so that
trays can be opened
or removed)
Back
: 320 mm
(enough space to
allow opening of the
rear output tray)
Right
: 100 mm
(enough space for
ventilation)
Left
: 100 mm
(enough space for
ventilation)
320mm(12.6in)
482.6mm(19in)
100mm
(3.9in)
100mm
(3.9in)
Installing the Toner Cartridge
1
Open the top cover. Pull up on the handle to open the
cover.
2
Remove the starter toner cartridge from its bag.
C
AUTION
: Do not use sharp objects, such as a knife or
scissors, to open the toner cartridge package. They might
scratch the drum of the cartridge.
3
Locate the sealing tape at the end of the toner cartridge.
Carefully pull the tape completely out of the cartridge and
discard it.
N
OTES
:
The sealing tape should be longer than 60 cm when correctly
removed.
• Holding the toner cartridge, pull the sealing tape straight to
remove it from the cartridge. Be careful not to cut the tape.
If this happens, you cannot use the toner cartridge.
• Refer to the helpful pictures on the cartridge wrapping paper.