Samsung NX58M6650WS/AA User Manual - Page 42

Warming / Storage drawer, English, To re-install the oven door

Get Samsung NX58M6650WS/AA PDF manuals and user guides View all Samsung NX58M6650WS/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Maintenance To re-install the oven door 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into the bottom of the slot. Bottom edge of slot Hinge arm Indentation 3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot. 4. Push the hinge locks up against the front frame of the oven cavity into the locked position. Hinge lock Warming / Storage drawer Warming drawer (NX58*665*** Only) 1. Slide open the drawer until it stops. 2. Locate the roller guide clips on either side. Using both hands, pull down the left clip while lifting the right clip, and then remove the drawer. 3. Clean the drawer in warm, soapy water using a cloth or soft brush. Then, rinse and dry it thoroughly. 4. Put the drawer in the roller guides on either side, and then snap the clips into place. Maintenance 5. Close the oven door. Unlocked position Locked position 42 English NX5000M_NX58M6650WS_AA_DG68-00993A-04_EN+MES+CFR.indb 42 Storage drawer (NX58*663*** Only) 1. Slide open the drawer until it stops. 2. Pull the drawer with lifting it for removal. 3. Clean the drawer in warm, soapy water using a cloth or soft brush. Then, rinse and dry it thoroughly. 4. Push in the drawer while slightly lifting the front to close it. 2018-12-18 6:57:27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
42 English
Maintenance
Maintenance
Warming / Storage drawer
Warming drawer (NX58*665*** Only)
1.
Slide open the drawer until it stops.
2.
Locate the roller guide clips on either
side. Using both hands, pull down the
left clip while lifting the right clip, and
then remove the drawer.
3.
Clean the drawer in warm, soapy water
using a cloth or soft brush. Then, rinse
and dry it thoroughly.
4.
Put the drawer in the roller guides on
either side, and then snap the clips into
place.
Storage drawer (NX58*663*** Only)
1.
Slide open the drawer until it stops.
2.
Pull the drawer with lifting it for
removal.
3.
Clean the drawer in warm, soapy water
using a cloth or soft brush. Then, rinse
and dry it thoroughly.
4.
Push in the drawer while slightly lifting
the front to close it.
To re-install the oven door
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
Hinge arm
Bottom
edge of
slot
Indentation
3.
Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4.
Push the hinge locks up against the front frame of the oven cavity into the
locked position.
Hinge lock
Locked position
Unlocked position
5.
Close the oven door.
NX5000M_NX58M6650WS_AA_DG68-00993A-04_EN+MES+CFR.indb
42
2018-12-18
°° 6:57:27