Samsung PN50A510P3F User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 13

Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages ~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV.  Connect the cable or antenna to the ANT IN terminal on the back of the VCR.  Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. TV Rear Panel 4 Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN [Y/VIDEO] jack on the TV. VCR Rear Panel 5 Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN [R-AUDIO-L] jacks on the  TV. 5 Audio Cable(Not supplied) 4 Video Cable(Not supplied)  Antenna cable(Not supplied) ➢ If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the "R" jack. ➢ Each VCR has a different back panel configuration. ➢ When connecting a VCR, match the color of the connection terminal to the cable. ➢ When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). Connecting an Amplifier / DVD Home Theater 1 Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Amplifier/DVD Home Theater. Amplifier / DVD Home Theater When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks terminals : Decrease the volume of the TV, and adjust the volume level with the Amplifier's volume control. Audio Cable (Not supplied) TV Rear Panel ➢ Each Amplifier / DVD Home Theater has a different back panel configuration. ➢ When connecting an Amplifier / DVD Home Theater, match the color of the connection terminal to the cable. English - 1