Samsung RS22HDHPNWW User Manual Ver.0.1 (English, French, Spanish) - Page 20
Operating the SAMSUNG side, by-side refrigerator
View all Samsung RS22HDHPNWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Operating the SAMSUNG sideby-side refrigerator USING THE CONTROL PANEL / DIGITAL DISPLAY (1) (2) (3) (7) (4) (5) (6) (8) ( 5 ) Fridge Press the Fridge button to set the Fridge temperature. You can set temperature between 44 °F (7 °C) and 34 °F (1 °C). The Power Cool function starts operating when you set the temperature lower than 34 °F (1 °C). If you select "Power Cool", the inside temperature of the Fridge will decrease for about two and a half hours. When the Power Cool mode exits, the notch is reset to the factory default temperature. ( 1 ) Power Freeze / Override (3sec) 1. Press the Power Freeze button to decrease the time needed to freeze products in the Freezer. This can be helpful if you need to quickly freeze items that spoil easily or if the temperature in the freezer has warmed dramatically. (For example, if the door was left open). 2. The Override function activates/ deactivates Smart Grid (page 25). Press the Power Freezer/Override button for 3 seconds to set/clear the Override function. ( 2 ) Freezer Press the Freezer button to set the freezer temperature. You can set the temperature between 5 °F (-15 °C) and -8 °F (-23 °C). ( 6 ) Ice Off / Child Lock (3sec) 1. Press the Ice Off button to turn the ice making function off. 2. Press and hold this button for 3 seconds, to turn on the Chid lock and lock all the panel buttons, including the Ice button and the dispensers. To cancel this function, press and hold this button for 3 seconds again. ( 7 ) Press the Ice button to choose cubed or Ice crushed ice. ( 8 ) Press the Water button for water. Water ( 3 ) Energy Saver / Reset Filter (3sec) 1. For better energy efficiency, press the Energy Saver button. If condensation occurs on the doors, press again to turn the Energy Saver Button function off. 2. When you change the water filter, press and hold this button for 3 seconds to reset the water filter indicator. ( 4 ) Lighting / °C↔°F (3sec) 1. Press the Lighting button to turn on the dispenser LED lamp. 2. To switch the temperature units between ºC and ºF, press and hold this button for 3 seconds. Each time you press and hold the button for 3 seconds, the ºC and ºF temperature modes alternate and the ºC or ºF icon lights up, indicating your selection. USING THE DIGITAL DISPLAY " Freezer Temp." indicates the current Freezer temperature. " Fridge Temp." indicates the current Fridge temperature. When not in use, the Display will turn off. This is normal operation. English - 20 DA68-02966A-01.indb 20 2014. 2. 26. �� 6:41