Samsung SCX4521F Service Manual - Page 115
Digital Printer, Ghost 1
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Troubleshooting 6.5.9 Ghost (1) • Description Ghost occurs at 75.5 mm intervals of the OPC drum in the whole printing. Digital Printer Digital Printer Digital Printer Digital Printer Digital Printer Digital Printer 75.5mm Check and Cause 1. Bad contacts caused by contamination from toner particles between high voltage terminal in the main body and the electrode of the Developer. Solution 1. Clean the terminals when contaminated by toner particles. 2. Bad contacts caused by contamination from toner particles between high voltage terminal in the main body and the one in the HVPS board. 2. Occur in the developer cartridge, replace the developer and try to print out. 3. The life of developer is expired. 3. Replace the Main board and HVPS Board if not solved by the above directions 1-2. 4. Transfer roller lifetime(50.000 sheets) has 4. If not solved by the direction 3, check the expired. transfer roller lifetime and replace it. 5. Abnormal low temperature(below 10°C). 5. Wait about 1 hour after power on before using printer. 6.5.10 Ghost (2) • Description Ghost occurs at 75.5 mm intervals of the OPC drum in the whole printing. (When printing on card stock or transparencies using manual feeder) Digital Printer Digital Printer Digital Printer Digital Printer Digital Printer Digital Printer 75.5mm Check and Cause When printing on card stock thicker than normal paper or transparencies such as OHP, higher transfer voltage is required. Solution Select 'Thick Mode' on paper type menu from the software application and after using returning to the original mode is recommended. 6-20 Service Manual Samsung Electronics