Samsung SCX4521F Service Manual - Page 77
LCD Status Error Massages, STATUS, LCD Display, Descriptions - paper jam
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Alignment and Adjustments 4.4 LCD Status Error Massages STATUS Document Jam Door Open or Jam Cover Open NO paper PAPER JAM 0 PAPER JAM 1 PAPER JAM 2 Communication Error Line Error NO ANSWER INCOMPATIBLE LINE BUSY POWER FAILURE STOP PRESSED MEMORY FULL FUSER ERROR LSU ERROR LSU ERROR TONER LOW TONER EMPTY LCD Display Document Jam [Front or Rear] [Cover Open] [ No Paper ] Add Paper [Paper Jam 0] Open/Close Door [Paper Jam 1] Open/Close Door [Paper Jam 2] Check Inside [COMM. Error] [Line Error] [No Answer] [Incompatible] Line Busy Power Failure [Stop Pressed] Memory Full CRU Fuse Error [Hsync Error] [LSU Error] [Toner Low] [Toner Empty] Descriptions When Document Jam occurred at ADF module. This is displayed on LCD, Print in the Transmission Journal. When machine' front side cover or Jam Cover was opened, it displayed On the LCD. When there is no paper in CASSETTE Tray, machine Displays this message on LCD. When the machine encountered paper jam in pick up area, Machine displays on the LCD until DOOR OPEN & CLOSE. When the machine encountered paper jam in paper exit of Machine, machine displays on the LCD until DOOR OPEN & CLOSE. When the machine encountered paper jam in paper exit of Machine, machine displays on the LCD until DOOR OPEN & CLOSE. When the machine has problem in communication, It displayed on the LCD. Machine displays this in case of Transmission. Machine displays this in case of fax handshaking step of Reception. When the machine has problem in case of Fax Data reception step. When the machine could not connect to remote fax after Completion of redial up to redial counter in system data. Remote party did not have the requested feature, such as polling. The remote fax didn't answer. When the machine's user memory has not been backup and There was power off / on . When the operator pressed the STOP button during transmission. When the machine has encountered the user memory was full, When the machine failed in installing the new toner cartridge. tech mode user mode When the machine has encountered the Laser Beam Scanning unit could not reach the READY state, When the machine has encountered the Toner Low, When the machine has encountered the Toner Empty, 4-17 Service Manual Samsung Electronics