Samsung SNT-1010 User Manual - Page 13

To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem, Connect SNT-1010 to an IP sharer

Get Samsung SNT-1010 PDF manuals and user guides View all Samsung SNT-1010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Network Connection & Setup To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem (Continued) [ STEP 5 ] To connect a local PC in the IP sharer to SNT-1010 1 Run the IP Installer on your local PC and search for SNT-1010. 2 If found, double-click the SNT-1010 to start the Internet browser and try to connect to SNT-1010. Alternately, launch the Internet browser manually and enter the IP address of the SNT-1010 found in the address bar to connect to it. ex) http://192.168.1.2 [ STEP 6 ] To connect to SNT-1010 from a remote PC 1 You can't use the IP Installer on a remote PC that is not connected to the IP sharer. This is because the IP Installer does not work on the Internet. 2 You can use DDNS URL of SNT-1010 to connect to the IP sharer internal SNT-1010. 3 However, you must set the port-forwarding for the IP sharer before you can connect to the IP sharer internal SNT-1010 from a remote PC. For more information on the port-forwarding, refer to Use IP Sharer: Port Forwarding Setting (Port Mapping). 4 When the port forwarding is done, run the Internet browser on the remote PC and enter the DDNS URL address or, the Internet IP address of the IP sharer in the address bar for connecting to SNT-1010. ex) http://mfffe42.websamsung.net For the DDNS URL address, refer to "To check the DDNS address" on page 41. 24 Network Connection & Setup This is for a large network environment such Connect SNT-1010 to an IP sharer with local area networking as corporate office, building, public office and factory. SNT-1010 1 SNT-1010 2 IP Sharer Switch HUB Firewall External Remote PC Local PC IP Sharer External PC DDNS Server (Data Center, KOREA) [ STEP 1 ] To configure the network settings of the local PC connected to an IP sharer To configure the network settings of the local PC connected to an IP sharer, follow the instructions below. Select : or Follow the instructions below if you select : ex1) If the address (LAN IP)of the IP sharer is 192.168.1.1 IP address : 192.168.1.100 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.1.1 ex2) If the address (LAN IP)of the IP sharer is 192.168.0.1 IP address : 192.168.1.100 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.0.1 ex3) If the address (LAN IP)of the IP sharer is 192.168.xxx.1 IP address : 192.168.1.100 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.xxx.1 For the address of the IP sharer, refer to the product's documentation. Note 25 Chapter 3 Network Connection &Setup To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem/Connect SNT-1010 to an IP sharer with local area networking

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
25
Chapter 3 Network Connection &Setup
To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem/Connect SNT-1010 to an IP sharer with local area networking
24
[ STEP 5 ] To connect a local PC in the IP sharer to SNT-1010
[ STEP 6 ] To connect to SNT-1010 from a remote PC
Network Connection & Setup
To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem
(Continued)
1
Run the IP Installer on your local PC and search for SNT-1010.
2
If found, double-click the SNT-1010 to start the Internet browser and try to connect to
SNT-1010. Alternately, launch the Internet browser manually and enter the IP address of the
SNT-1010 found in the address bar to connect to it.
1
You can’t use the IP Installer on a remote PC that is not connected to the IP sharer.
This is because the IP Installer does not work on the Internet.
2
You can use DDNS URL of SNT-1010 to connect to the IP sharer internal SNT-1010.
3
However, you must set the port-forwarding for the IP sharer before you can connect to the IP
sharer internal SNT-1010 from a remote PC.
For more information on the port-forwarding, refer to Use IP Sharer: Port Forwarding Setting
(Port Mapping).
4
When the port forwarding is done, run the Internet browser on the remote PC and enter the
DDNS URL address or, the Internet IP address of the IP sharer in the address bar for
connecting to SNT-1010.
For the DDNS URL address, refer to
“
To check the DDNS address
”
on page 41.
Local PC
SNT-1010
1
SNT-1010
2
IP Sharer External PC
Firewall
IP Sharer
Switch
HUB
External
Remote PC
DDNS Server
(Data Center, KOREA)
Network Connection & Setup
Connect SNT-1010 to an IP sharer with local area networking
This is for a large network environment such
as corporate office, building, public office
and factory.
To configure the network settings of the local PC connected to an IP sharer, follow the instructions below.
Select : <Network Neighborhood>
<Properties>
<Local Area Connection>
<Properties>
<General>
<Internet Protocol (TCP/IP)>
<Properties>
<Obtain an IP address automatically> or <Use the following IP address>
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP)of the IP sharer is 192.168.1.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
ex2) If the address (LAN IP)of the IP sharer is 192.168.0.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
ex3) If the address (LAN IP)of the IP sharer is 192.168.xxx.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.xxx.1
[ STEP 1 ] To configure the network settings of the local PC connected to an IP sharer
For the address of the IP sharer, refer to the product
’
s documentation.
Note