Samsung SNT-1010 User Manual - Page 40
Resetting the System, Network Configuration
View all Samsung SNT-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Setting Up Network Configuration (Continued) To set DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of an SNT-1010 into a general Host Name so that the user can easily remember it and enables connecting an SNT-1010 with a fixed Host Name even if the IP address of the SNT-1010 may be dynamically changed. Click . The DDNS window appears. Appendix Resetting the System You can initialize all settings of this product when it does not work properly or causes a problem. Chapter 9 Appendix Network Configuration/Resetting the System If Samsung's DDNS service is selected, the Host Name is automatically generated using the SNT-1010 MAC address. A SNT-1010 MAC address consists of + + . The lower-case alphabet letter becomes if the first 6 digits of the MAC address is , if , and if . Example) - If the MAC address of SNT-1010 is 00 : 00 : f0 : ff : fe : 42 : e + fffe42 + websamsung.net = efffe42.websamsung.net - If the MAC address of SNT-1010 is 00 : 16 : 6c : ff : fe : 42 : m + fffe42 + websamsung.net = mfffe42.websamsung.net - SIf the MAC address of SNT-1010 is 00 : 68 : 36 : ff : fe : 42 : p + fffe42 + websamsung.net = pfffe42.websamsung.net To use another DDNS service, sign up a DDNS site that is supported by an SNT-1010 and use it with the user ID and password you have specified when you sign up the site. For information about how to sign up another DDNS and setup Host Name, please visit the corresponding DDNS service website and ask about that. 78 Press and hold the [FACTORY RESET] button on the rear panel of the product for 3 seconds and release it when the [STATUS] indicator blinks 3 times. The [STATUS] LED turns green and the system restarts when all the settings are initialized. Notice Since if the product is reset, all settings are initialized, you must configure basic network settings such as IP Address, Subnet Mask, Gateway, etc., using the program. You can reset the system even from a remote location by selecting . Note 79