Samsung SNT-1010 User Manual - Page 16
Connect SNT-1010 directly to a DHCP-based xDSL, Cable modem, Connect SNT-1010 directly to local area
View all Samsung SNT-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Network Connection & Setup Connect SNT-1010 directly to a DHCP-based xDSL/ This is enabled for a modem using DHCP. Cable modem SNT-1010 xDSL or Cable Modem External Remote PC DDNS Server (Data Center, KOREA) [ STEP 1 ] To connect SNT-1010 to a xDSL/Cable modem 1. Position the IP selection switch to D (Dynamic IP). 2. Connect SNT-1010 to the modem using the Direct LAN Cable (UTP cable). SNT-1010 does not come with the Direct LAN cable. You have to purchase it separately. 3. Connect SNT-1010 to the power source. 4. When SNT-1010 starts, it automatically obtains an IP address from the modem. 5. As the IP Installer does not work in the Internet, you can't use the IP Installer for this purpose. [ STEP 2 ] To connect to SNT-1010 from a remote PC 1 Launch an Internet browser on the remote PC. 2 Enter the DDNS URL address in the address bar of the browser for connecting to SNT-1010. ex) http://mfffe42.websamsung.net For the DDNS URL address, refer to "To check the DDNS address" on page 41. To check if your xDSL / Cable modem uses DHCP, contact your Internet Service Provider. Note 30 Network Connection & Setup Connect SNT-1010 directly to local area networking SNT-1010 1 SNT-1010 2 Switch HUB Firewall External Remote PC Local PC DDNS Server (Data Center, KOREA) [ STEP 1 ] To connect SNT-1010 to local area networking 1. Position the IP selection switch to S (Static IP). 2. SNT-1010 is connected to the switching hub using the Direct LAN Cable (UTP cable). 3. Connect SNT-1010 to the power source. 4. Use the IP installer on your local PC to configure the , , and settings. For the value for each of the fields, contact your network administrator. For how to use the IP installer, refer to "Static IP Setting" on page 33. [ STEP 2 ] To connect to SNT-1010 from a local PC in the LAN 1 Launch an Internet browser on the local PC. 2 Enter the IP address of SNT-1010 in the address bar of the browser. A remote PC in an external Internet out of the LAN network may not be able to connect to SNT-1010 installed Note in the intranet if the port-forwarding is not properly set or a firewall is set. In this case, to resolve the problem, contact your network administrator. 31 Chapter 3 Network Connection &Setup Connect SNT-1010 to an IP sharer with local area networking /Connect SNT-1010 directly to local area networking