Samsung SNT-1010 User Manual - Page 15
Network Connection &Setup
View all Samsung SNT-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 3 Network Connection &Setup Connect SNT-1010 to an IP sharer with local area networking Network Connection & Setup Connect SNT-1010 to an IP sharer with local area networking (Continued) [ STEP 4 ] To connect a local PC in the IP sharer to SNT-1010 1 Run the IP Installer on your local PC and search for SNT-1010. 2 If found, double-click the SNT-1010 to start the Internet browser and try to connect to SNT-1010. Alternately, launch the Internet browser manually and enter the IP address of the SNT-1010 found in the address bar to connect to it. ex) http://192.168.1.2 [ STEP 5 ] To connect to SNT-1010 from an IP sharer external PC 1 An IP sharer external PC can't use the IP Installer to search for an IP sharer internal SNT-1010 This is because the IP Installer does not work in a network where the gateway is different. 2 In this case, you can use the DDNS URL of SNT-1010 or the Internet IP address of the IP sharer to connect to the IP sharer internal SNT-1010. 3 However, you must set the port-forwarding for the IP sharer before you can connect to the IP sharer internal SNT-1010 from a remote PC. For more information on the port-forwarding, refer to Use IP Sharer: Port Forwarding Setting (Port Mapping). 4 When the port forwarding is done, run the Internet browser on the IP Sharer External PC and enter the DDNS URL address or, the Internet IP address of the IP sharer in the address bar for connecting to SNT-1010. ex) http://mfffe42.websamsung.net For the DDNS URL address, refer to "To check the DDNS address" on page 41. A remote PC in an external Internet out of the LAN network may not be able to connect to SNT-1010 installed Note in the intranet if the port-forwarding is not properly set or a firewall is set. In this case, to resolve the problem, contact your network administrator. 28 29