Sanyo HD2000 Instruction Manual, PLV-HD2000 - Page 25

BASIC OPERATION SELECTING INPUT SOURCE DIRECT OPERATION Select INPUT source by pressing INPUT 1/2 and INPUT 3/4 buttons on Side Control or INPUT 1, INPUT 2, INPUT 3 and INPUT 4 on Remote Control Unit. MENU OPERATION 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select Input and press SELECT button. Another dialog box INPUT SELECT Menu will appear. 2 Press POINT DOWN button and a red-arrow icon will appear. Move arrow to INPUT source that you want to select, and then press SELECT button. WHEN SELECT INPUT 1 (SDI TERMINAL ) Move a pointer to source that you want to select and press SELECT button. LINK-A (YCbCr) When connect a Single-LINK signal (YCbCr/4:2:2/10 bit) from video equipment to projector LINK-A input jack. INPUT 1/2 button INPUT 1 INPUT 2 INPUT 3/4 button INPUT 3 INPUT 4 INPUT MENU INPUT 1-4 buttons INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT Menu icon Move arrow to INPUT source that you want to select, and then press SELECT button. Input 1 LINK-B (YCbCr) When connect a Single-LINK signal (YCbCr/4:2:2/10 bit) from video equipment to projector LINK-B input jack. Dual (YCbCr1) When connect a Dual-LINK signal (YCbCr/4:2:2/10 bit) from video equipment to projector LINK-A and LINK-B input jacks. Dual (YCbCr2) When connect a Dual-LINK signal (YCbCr/4:2:2/12 bit) from video equipment to projector LINK-A and LINK-B input jacks. Dual (YCbCr3) When connect a Dual-LINK signal (YCbCr/4:4:4/10 bit) from video equipment to projector LINK-A and LINK-B input jacks. Dual (YCbCr4) When connect a Dual-LINK signal (YCbCr/4:4:4/12 bit) from video equipment to projector LINK-A and LINK-B input jacks. Dual (RGB 1) When connect a Dual-LINK signal (RGB/4:4:4/10 bit) from video equipment to projector LINK-A and LINK-B input jacks. Dual (RGB 2) When connect a Dual-LINK signal (RGB/4:4:4/12 bit) from video equipment to projector LINK-A and LINK-B input jacks. 25