Sanyo HD2000 Instruction Manual, PLV-HD2000 - Page 36

DISPLAY ADJUST 4 To move the red frame pointer to "MENU", and then press the SELECT button. The message "OK"? is displayed. Move the pointer to [Yes] and then press SELECT button. The COLOR MANAGEMENT menu will be exited and the display will return to the IMAGE ADJUST menu. (At this time, the image will stop being paused and normal projection will resume.) After changing the COLOR MANAGEMENT settings, use the IMAGE ADJUST menu to store the changed settings. COLOR SELECTION MODE Level and phase adjustment palette. COLOR SELECTION MODE COLOR.M The mode will return to the pointer mode (even if you press the MENU key on the projector or the remote control). (You will need to reselect and re-adjust the color in this case.) MENU The COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "LIST" using the POINT buttons and change to the next mode (LIST mode). LIST LIST MODE LIST MODE COLOR.M MENU COLOR PALETTE DEL The check mark will be cleared and the effect of the setting adjustment for that line on the projected images will be momentarily canceled. COLOR PALETTE The mode will return to COLOR SELECTION mode so that you can re-adjust the setting for the color in that line. This option is not available if the check mark has been cleared by the operation immediately above.) DEL The setting adjustment for the color in that line will be canceled. ALL DEL The setting adjustment for the colors in all lines will be canceled. COLOR M. The mode will return to POINTER mode. ALL DEL MENU COLOR M. 36