Sanyo PLC-HF15000L Owner's Manual - Page 34
Computer Input Source Selection
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Input Selection Computer Input Source Selection Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. 2 Use the Point ed buttons to select the desired input and then press the Point 8 button to access the submenu items. 3 Use the Point ed buttons to select the desired source and then press the SELECT button. INPUT MENU ✔Note: •"Input 3" and/or "Input 4" are selectable only when interface board(s) are connected to either or both of the slots. WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) RGB(PC analog) When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog). ✔Note: • Input source changes if the INPUT 1 button on the remote control is pressed. WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS ) When connecting the computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks: INPUT 2 MENU RGB When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB. 34
![](/manual_guide/products/sanyo-plchf15000l-owners-manual-a9efd20/34.png)