Sanyo PLC-HF15000L Owner's Manual - Page 35
Video Input Source Selection
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Video Input Source Selection Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. 2 Use the Point ed buttons to select the desired input and then press the Point 8 button to access the submenu items. 3 Use the Point ed buttons to select the desired source and then press the SELECT button. WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) When connecting to video equipment, select the type of Video source in the Source Select Menu. RGB(Scart) When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart). RGB(PC digital) When your computer is connected to INPU T 1 (DIGITAL) terminal, select RGB (PC digital). RGB(AV HDCP) If the HDCP-compatible signal source is connected to the INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP). HDMI When the video signal is connected to the HDMI terminal, select HDMI. INPUT 1 MENU WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS ) When connecting to video equipment, select the type of Video source in the Source Select Menu. Y, Pb/Cb, Pr/Cr When the video input signal is connected to the Y, Pb/Cb, Pr/Cr jacks, select Y, Pb/ Cb, Pr/Cr. Video When the video input signal is connected to the VIDEO jack, select Video. S-Video When the video input signal is connected to the S-VIDEO jack, select S-Video. ✔Note: • When the video input signal is connected to the Y-Pb/Cb-Pr/ Cr jacks, Y,Pb/Cb,Pr/Cr takes precedence of RGB. • Y,Pb/Cb,Pr/Cr input can accept the component signal and the analog RGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/Cr input source, set to RGB input manually. INPUT 2 MENU Input Selection 35