Sanyo PLC-HF15000L Owner's Manual - Page 69
P-timer, Test pattern, Factory default, Stop or Cancel the P-timer via Remote Control
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
P-timer This function allows you to change the presentation of the Ptimer and execute it. P-TIMER Select one of the following options: Count up The P-timer display 000:00 appears on the screen and the count starts (000:00- 180:00) Count down........ The time set in the Timer setting appears on the screen and the countdown starts. Timer Use the Point ed buttons to set the Timer (1-180 Min). Only set to Count down, Timer is active. Factory default value is 10 Min. Start Executes the count up or count down function. Press the SELECT button at Start, Start changes to Stop in the Screen Menu. At that time, press the SELECT button at Stop to stop Count up or Count down, and Stop changes to Restart in the Screen Menu. Press the SELECT button at Restart to resume Count up or Count down. Reset Resets the P-timer values. Press the SELECT button at Reset to return to the following value; Count up ... "000:00" Count down ... Timer that you set Exit To exit the P-timer operation. Stop or Cancel the P-timer via Remote Control To stop the P-timer, press the P-TIMER button. To cancel the P-timer, press and hold the P-TIMER button for a few seconds. Test pattern Various test pattern are available for use when setting up the projector. Factory default This function returns all setting values except for User logo, PIN code lock, Logo PIN code lock, Filter counter and Network setting to the factory default settings. Settings 69