Sanyo PLC-HF15000L Owner's Manual - Page 47
Video Input, Video System Selection
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then AV System menu (Video or S-video) press the Point 8 or the SELECT button. 2 Use the Point ed buttons to select System and then press the Point 8 or the SELECT button. 3 Use the Point ed buttons to select the desired system and then press the SELECT button. Video Jack or S-video Jack Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Y, Pb/Cb, Pr/Cr Jacks Auto AV System menu (Y, Pb/Cb, Pr/Cr) The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 1035i, 1080i or 1080p, select the system manually. Y, Pb/Cb, Pr/Cr SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i, and 1080p. ✔Note: The AV System Menu cannot be selected when selecting RGB (Scart). 47