Sanyo PLC-XR70N Owners Manual - Page 11
Connecting the AC Cord, INSTALLATION, CAUTION
View all Sanyo PLC-XR70N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CONNECTING THE AC POWER CORD This projector uses nominal input voltages of 100 ~ 120 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult a sales dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment before turning the projector on. (Refer to page 14 ~ 17 for connection.) 1 Connect the AC Power Cord (supplied) to the Power Cord Connector on the projector. 2 Connect the AC Power Cord to the AC outlet. POWER CORD CONNECTOR INSTALLATION CAUTION For the safety, unplug the AC Power Cord when the appliance is not used. AC POWER CORD Projector side (Female) Connect to the Power Cord Connector on the projector. AC Outlet side (Male) Ground Connect the AC Outlet. 11