Sennheiser IS 380 Instructions for Use - Page 9

ብ ባ ቢ SETTING UP THE TRANSMITTER Place the transmitter near your television set or hi-fi system. PUTTING THE TRANSMITTER INTO OPERATION Ǡ Use the supplied cable to connect socket ቢ on the TI 380 transmitter with the headphone socket on your television set or hi-fi system. NOTE If your television set does not have a headphone socket, the sound signal can also be taken from the SCART socket (video recorder socket). Please order the suitable Sennheiser adaptor (Cat. no. 47874) from your Sennheiser dealer. Ǡ Connect the supplied plug-in mains unit to socket ባ on the TI 380 transmitter, then plug the mains unit into the mains. 16 ቤ ቦ LEVEL CONTROL OF THE TRANSMITTER Adjust the volume of your hi-fi system or television set to a middle position. The TI 380 transmitter features an automatic modulation control which prevents overmodulation. PUTTING THE RECEIVER INTO OPERATION Insert the BA 151 accupack into the compartment in the headphone receiver. Take special note of the instructions on accupack operation on pages 20/21 of this manual! (NB: The BA 151 accupack must be charged for 24 hours before first use!) SWITCHING ON THE HEADPHONE RECEIVER Use switch ቤ to turn on the headphone receiver. Adjust the volume with control ብ. The balance control ቦ serves to compensate for volume differences between the left and right channel. 17