Sharp AL 2030 AL-2030 AL-2040CS Operation Manual - Page 57
User Programs - alarm
UPC - 074000075146
View all Sharp AL 2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3 To enter the toner save mode, press the light ( ) key. The light and dark indicator marked "1" will light up, indicating the toner save mode is selected. 4 Press the exposure mode selector key. The PHOTO ( ) indicator will stop blinking and light up steadily. The light and dark indicator marked "3" will light up. The toner save mode is now active. To return to the standard mode, repeat the procedure but use the dark ( ) key to select exposure level "5" in step 3. USER PROGRAMS The user programs allow the parameters of certain functions to be set, changed, or canceled as desired. Setting the user programs 1 Press and hold down the light ( ) key simultaneously for more than 5 seconds until all the alarm indicators ( , , ) blink and " " appears in the display. 2 Use the left copy quantity ( ) key to select a user program number (For the user program numbers, see the following table.). The selected number will blink in the left side of the display. 6 3 Press the start ( ) key. The entered program number will be steadily lit and the currently selected parameter number for the program will blink on the right side of the display. 4 Select the desired parameter using the right copy quantity ( ) key. The entered parameter number will blink on the right of the display. Program No. Mode Parameters 1 Auto clear time 1 10 sec., 2 30 sec., *3 60 sec., 4 90 sec., 5 120 sec., 6 OFF 2 Preheat mode *1 30 sec., 2 60 sec., 3 5 min., 4 30 min., 5 60 min., 6 120 min., 7 240 min. 3 Auto power shut- off mode *1 ON, 2 OFF 4 Auto power shut- off *1 5 min., 2 30min., 3 60 min., timer 4 120 min., 5 240 min. 55