Sharp AL 2030 AL-2030 AL-2040CS Operation Manual - Page 58
Displaying Total Number Of Copies
UPC - 074000075146
View all Sharp AL 2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Program No. Mode Parameters SPF automatic 1 5 min., *2 30 min., 6 original discharge 3 60 min., 4 120 min., time 5 240 min., 6 OFF 10 Resolution of AUTO & MANUAL mode *1 300dpi, 2 600dpi 21 Reset factory 1 YES, *2 NO Prevention of OC 24 copies when the *1 ON, 2 OFF SPF is up function 25 Copy effective paper width setting function (Bypass tray) *1 2 Large (LETTER/A4 width), Small (INVOICE/B5R width) 26 Copy effective paper width setting function (Tray 1) *1 2 Large (LETTER/A4 width), Small (INVOICE/B5R width) Copy effective paper 27 width setting function *1 Large (LETTER/A4 width), (Tray 2) 2 Small (INVOICE/B5R width) (AL-2040CS only) Selection of copy 28 start state (Polygon *1 ON, 2 OFF rotation on/off) Fusing temperature 29 setting when the *1 Low, 2 High bypass tray is used * Factory default settings are indicated with an asterisk (*). 5 Press the start ( ) key. The right-hand number in the display will be steadily lit and the entered value will be stored. To change the setting or to set another mode, press the clear key. The unit will return to step 2. 6 Press the light ( ) key to return to the normal copy mode. DISPLAYING TOTAL NUMBER OF COPIES Use the following procedure to display the total number of copies. Press and hold down the clear key for approximately 5 seconds. The total number of copies will appear in two steps, each with three digits. Example: Total number of copies is 1,234. 56