Sharp AN-ACS1U ANACS1U Operation Manual - Page 13

Installing the unit Before installation • Because this unit is extremely heavy, it must always be handled by at least two persons, to prevent the risk of injury and accidents. • For safety, protective gloves should be worn when handling the unit. • For information on supplied parts and accessories, please see page 6. • Take care not to scratch the floor etc. when moving the unit. • Do not touch the speaker mesh on the front side when moving the unit. Otherwise the mesh or the speakers may be damaged. • Never place the unit on an unstable surface or any surface unable to sustain its weight. Otherwise the unit may fall over or drop, and there is a risk of damage and injury. • Before moving the unit, be sure to turn power off and disconnect the power cord from the AC outlet. Also disconnect all cables from other components. Double-check this before you begin. Otherwise there is a risk of damage and injury. • Do not move the unit with a TV or other component on top. Otherwise such a component may fall over or drop, and there is a risk of damage and injury. • The glass parts are made of reinforced glass, but dropping pointed objects on them or strongly hitting a glass surface may cause it to break. Always take proper precautions. Speaker mesh sections Placing the top glass cover and glass shelf on the unit Position the top glass cover and glass shelf correctly as shown here. Glass shelf Top glass cover Logo sticker Top glass cover cushion pads (already attached to the unit) o Preparation for Use Caution: • This procedure should be performed by at least two people. • The top glass cover and glass shelf are not fastened to the unit. • After placing the top glass cover and glass shelf on the unit, take care to keep the unit level when transporting it. Otherwise these parts may fall off, and there is a risk of damage and injury. Glass shelf cushion pads (already attached to the unit) Precaution label Attaching the wall spacers The wall spacers can be attached to the rear side of the top section of the unit (two locations, right and left). • The wall spacers serve to ensure proper clearance behind the unit and protect the connection cables from damage. Wall spacer (supplied) Wall spacer (supplied) Caution: • Do not carry the unit by holding the wall spacers. • When moving the unit, grasp it at the areas marked by arrows on the underside of the top board. • Do not carry the unit by holding the metal frame that supports the glass shelf. Insert wall spacer here (2 locations) Rear view 11