Sharp AN-ACS1U ANACS1U Operation Manual - Page 18

AC power connection Connecting the AC power cord After checking that all the connections have been made correctly, connect the AC power cord to the AC outlet. Power indicator lights up in red. Lit in red Rear panel (amplifier part) AC120V 60Hz To AC outlet NOTE • When connecting the power cords of the various components, plug in the power cord of the TV last. • If you have connected or disconnected an HDMI cable or have changed connections, cycle power to the TV (turn it off and then again) while power to all other components is on. • Never use a power cord other than the one supplied. Otherwise, a malfunction or an accident may occur. • Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time. • Always turn power off before disconnecting a power cord. Always grasp the plug and do not pull on the cable, as this can lead to cable break. To turn the power on To turn the power on: Press POWER on the remote control or the main unit. • The power indicator lights up green. • If the power does not turn on, check whether the power cord is plugged in properly. To set the unit to the stand-by mode: Press POWER again. • The power indicator lights up red. NOTE • After power-on, there is a mute interval of 8 seconds. • After the unit enters the stand-by mode, wait a few seconds to turn on again. Lit in green Lit in red 16