Sharp AN-ACS1U ANACS1U Operation Manual - Page 7

n General Information Precautions ■ General • Please ensure that the equipment is positioned in a well-ventilated area and that there is at least 4" (10 cm) of free space along the sides and back. There must also be a minimum of 4" (10 cm) of free space on the top of the unit. • Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/ electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. • Do not expose the unit to moisture, to temperatures higher than 140°F (60°C) or to extremely low temperatures. • If the unit does not work properly, unplug and plug it in again. Then turn on the unit. • In case of an electrical storm, unplug the unit for safety. • Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. ■ Cooling fan This unit is fitted with a cooling fan at the rear for improved cooling. Do not cover the opening in this section with any obstacles. Rear view Cooling fan Caution: • The unit will get warm while being used. Do not touch the warm areas of the unit for prolonged periods to avoid damage to you. • This unit is equipped with a special function which protects the amplifier circuit from damages. When it is activated, the sound switch is turned off. In this case, set the unit to the stand-by mode and turn on again. • Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. • This unit should only be used within the range of 41°F - 95°F (5°C - 35°C). • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. • The apparatus is designed for use in moderate climate. • Attention should be drawn to the environmental aspects of battery disposal. • The glass parts of this product are made of reinforced glass, but dropping pointed objects on them or strongly hitting a glass surface may cause it to break. Always take proper precautions. Warning: • The voltage used must be the same as that specified by this unit. Using this product with a higher voltage other than that specified is dangerous and may result in a fire or other types of accident, causing damage. SHARP will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified. ■ Volume control The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. 5