Sharp AN-ACS1U ANACS1U Operation Manual - Page 15

Connections • Before making connections, disconnect the power cords from all units. Refer to the manual of the respective unit for detailed instructions. • Do not connect HDMI CEC-enabled audio equipment to this unit or to the TV. Otherwise the AQUOS LINK function will not operate correctly. ■ The audio and video signal flow in a system using this unit is shown below. Signal flow when using equipment with HDMI connectors AQUOS AUDIO system Optical digital cable HDMI cable For details on connection, please see pages 14 - 15. AQUOS LINK TV o Preparation for Use Audio signal Video signal HDMI cable Blu-ray Disc player or similar NOTE • We recommend to connect a component with HDMI output to the HDMI input of the AQUOS AUDIO system. If the component is connected directly to the TV, the sound of the HDMI component sometimes cannot not be reproduced by the AQUOS AUDIO system. • If the input selector of the AQUOS AUDIO system is not set to HDMI 1 or HDMI 2, the sound from the Blu-ray Disc player or similar component cannot be reproduced by the TV. AQUOS LINK function When connecting an HDMI CEC (Consumer Electronics Control)-enabled AQUOS TV, Blu-ray Disc player, or similar component, operation of these components in the system can be linked. (For details on how to use AQUOS LINK function, please see pages 24 - 27.) Signal flow when using equipment without HDMI connectors AQUOS AUDIO system Optical digital cable 57 or Audio cable Audio signal Video signal Optical digital cable or Audio cable AV cable DVD player/VCR or similar NOTE • Use only audio cables without integrated resistors. Otherwise the volume level will be reduced. 13