Sharp AN-ACS1U ANACS1U Operation Manual - Page 16

Connections Connecting a TV (with HDMI connector) Use both the optical digital cable and HDMI cable for the connection. AQUOS LINK To use the AQUOS LINK function (pages 24 - 27), connect the audio signal of the TV to the AUX1 connector. If AUX2 is used, you must manually select the AUX2 input. Cables to use TV Optical digital cable (supplied) AUDIO To DIGITAL AUDIO DIGITAL output (optical) connector HDMI cable (supplied) If the cable is equipped with a protective cap, remove it before making the connection. NOTE • If only the HDMI cable is used for the connection, the sound of the TV cannot be reproduced by the AQUOS AUDIO system. To reproduce the sound of the TV with the AQUOS AUDIO system, the optical digital cable must be connected. • When connecting an HDMI CEC-enabled AQUOS TV or similar component, the AQUOS LINK function can be used. (Pages 24 - 27) HDMI To HDMI input connector Optical digital cable HDMI cable To HDMI OUTPUT (TO TV) connector Rear panel (amplifier part) Connect both cables To DIGITAL AUDIO INPUT (OPTICAL) connector (AUX1) Insert cable until you hear a click. Connecting a TV (without HDMI connector) Use the optical digital cable for the connection. If the TV does not have a digital audio output, use regular audio cable to make an analog connection. Cables to use TV Optical digital cable (supplied or commercially available) To DIGITAL AUDIO AUDIO output (optical) connector DIGITAL If the cable is equipped with a protective cap, remove it before making the connection. Audio cable (commercially available) Left (white) Right (red) Left (white) Right (red) Audio cable To AUDIO INPUT connectors (AUX3 or AUX4) Rear panel (amplifier part) or AUDIO L R To AUDIO output jacks Optical digital cable Make one of these connections (not both) To DIGITAL AUDIO INPUT (OPTICAL) connector (AUX1 or AUX2) Insert cable until you hear a click. 14