Sharp AN-ACS1U ANACS1U Operation Manual - Page 28

AQUOS LINK Reproducing AQUOS TV sound through the AQUOS AUDIO system Point towards AQUOS TV • Use the remote control of the AQUOS TV and point it towards the AQUOS TV for operation. 1 Press POWER. • Along with the AQUOS TV, power to the AQUOS AUDIO system is turned on automatically. • The input source of the AQUOS AUDIO system is automatically set to "AUX1". 2 Use VOLUME +/- to adjust the volume. • The volume level is displayed on the AQUOS TV and on the AQUOS AUDIO system. 3 Try out various preset sound modes. 1. Press OPTION. • The AQUOS LINK Menu screen appears. 2. Use a/b to select "Sound mode change" and press ENTER. • Each push of ENTER cycles through the following settings. STANDARD MOVIE NEWS MUSIC JAZZ NIGHT SPORTS LIVE POPS ROCK CLASSIC 3. Press OPTION. • The AQUOS LINK Menu screen disappears. 4 After use: Press POWER to enter the stand-by mode. • Along with the AQUOS TV, power to the AQUOS AUDIO system is turned off automatically. To switch the sound of SAP broadcasts Press AUDIO repeatedly to select the desired audio mode. • For details, please see the manual of the TV. Open the flip cover 26 Muting: The sound is muted temporarily when pressing MUTE on the remote control. To restore the sound, press the button again or press VOLUME +/-. NOTE • To reproduce the sound of another component connected to AUX2 - AUX4, press INPUT on the AQUOS AUDIO system to change the setting. (Page 19) Power on/off, volume adjustment, mute, and other functions can be linked to the AQUOS TV. • When an AQUOS LINK-enabled Blu-ray Disc player connected to HDMI 1 or HDMI 2 is used, the input setting of the AQUOS AUDIO system and the AQUOS TV is automatically selected as required. (Operating a menu or similar will also have the same effect.) • When two AQUOS LINK-enabled players are connected to the AQUOS AUDIO system, the most recently operated component will be automatically selected. • To use the AQUOS TV remote control for selecting one of two AQUOS LINK-enabled players connected to HDMI 1 and HDMI 2, bring up the AQUOS LINK MENU screen and use the "Model select" option. Each push of ENTER cycles through the connected components. • The AQUOS TV remote control is not supplied with this product. • The AQUOS TV remote control may be different depending on the model.