Sharp AR-M350 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 32
Loading paper in the multi purpose drawer, LOADING PAPER, Specifications - windows 8
View all Sharp AR-M350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
LOADING PAPER Loading paper in the multi purpose drawer The method of loading paper for the multi purpose drawer is the same for paper tray 1 in the main unit. Load paper referring to steps 1 to 5 on page xxxx. The following items, however, are different from paper tray 1. G Ordinary paper of standard sizes from 11" x 17" to 5-1/2" x 8-1/2"R (A3 to A5R) can be set. G Also certain types of special paper can be set. For special papers that can be set, see "Paper available in the bypass tray/multi purpose drawer" on page xxxx. When setting envelopes or postcards in the multi purpose drawer, read thoroughly the description of "Setting envelopes or postcards" below. I How to change the paper size If the paper size or paper type is changed when paper is set in the tray, the tray settings in the custom settings must be changed. Be sure to change the setting referring to "Method of setting paper size and type" on page xxxx. I Setting envelopes or postcards When setting envelopes or postcards in the multi purpose drawer, set them in the orientation shown below. Notes common to setting of envelopes and postcards G Do not print onto two sides. A paper misfeed or improper printing may occur. G Be sure to write addresses after printing. Do not use envelopes or postcards on which printing has been performed with a thermal transfer printer or an ink jet printer. Paper on which printing has been performed with a thermal transfer printer with a ribbon cassette, particularly, may cause printed characters to come off or may cause smudges on printouts. Example of setting postcards Be sure to set the postcards face down and the upper part located in the left. Note on setting postcards G Smooth out curled postcards before printing. Crumpling, misfeeds or improper printing may occur. Example of setting envelopes For envelopes, only the address side can be printed on. Be sure to set envelopes with the address side down and the upper part located in the left. Notes on setting of envelopes G For envelope sizes that can be used, see "Paper available in the bypass tray/multi purpose drawer" on page xxxx. G Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, selfadhesive patches or synthetic materials. A paper misfeed, improper fixing or failure may occur. Specifications Name Paper size Paper capacity Dimensions Weight Multi purpose drawer Max. 11" x 17" (A3), min. 5-1/2" x 8-1/2"R (A5R) 500 sheets (20 lbs. (80 g/m2)) of paper, 100 envelopes, 100 postcards, 100 sheets of transparency film 23-1/32" (W) x 20-7/8" (D) x 4-1/2" (H) (585 mm (W) x 530 mm (D) x 114 mm (H)) Approximately xxxx kg Specifications are subject to change for improvement without notice. 1-22