Sharp AR-M350 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 80
Staple cartridge replacement and staple jam removal, FINISHER
View all Sharp AR-M350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
FINISHER Staple cartridge replacement and staple jam removal When the staple cartridge is empty or staples become jammed, a message will appear in the message display of the operation panel. Follow the procedure below to replace the staple cartridge or remove jammed staples. 1 Open the front cover. NOTES G Do not remove the fixing tape before inserting the staple cartridge. G Ensure that the staples are securely fixed. Push the cartridge until it clicks in place. 6 Remove the tape that fixes the staples by pulling it straight. 2 Turn the staple unit to face up. 3 Hold the release lever to remove the staple box. Check the remaining staples in the staple box. If no staple remains, replace the staple cartridge (steps 4 to 9). If sufficient staples remain, remove the jammed staples (steps 10 to 14). 4 Remove the empty staple cartridge. 7 Insert the staple box. Push the staple box until it clicks into place. 8 Unlock the staple unit lever and return the staple unit to face down. 5 Insert a new staple cartridge into the staple box aligning the arrow of the staple cartridge with that of the staple box. 9 Close the front cover. NOTE Execute test printing in the staple sort mode to ensure that stapling is performed properly. Staple cartridge replacement is now complete. Following steps 10 to 14 are the procedure for staple jam removal. These steps are not needed for staple cartridge replacement. 5-12