Sharp AR-M350 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 83
Troubleshooting concerning the finisher, FINISHER
View all Sharp AR-M350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
FINISHER Troubleshooting (concerning the finisher) Check the list below before contacting the SHARP Service Center. Problem Stapling position is not correct. The finisher does not operate. Stapling cannot be performed. Solution Stapling position not set properly in the Check the stapling position setting. (See page xx.) stapling setting? The finisher is open or the top cover, front Close all covers. (See pages xx and xx.) cover or paper guide of the finisher open? Message indicating need to remove paper Remove all paper from the stapler compiler following from the stapler compiler displayed? the procedure described in step 1 on page xx. Message requesting check for the staple Remove jammed staples. (See page xx.) unit displayed? Message requesting adding staples Replace the staple cartridge. (See page xx.) displayed? Different size paper included? Stapling cannot be performed onto different size paper. Paper heavily curled? Paper may be curled heavily depending on the paper type and quality. Remove paper from the paper tray or the bypass tray, turn it upside down, and load it again. 5 5-15