Sharp AR-M350 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 82
Misfeed in the finisher, FINISHER
View all Sharp AR-M350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
FINISHER Misfeed in the finisher When a misfeed has occurred in the finisher during printing, remove the misfed paper following the procedure below. 1 Remove the misfed paper from the stapler compiler. Be careful not to tear the misfed paper during removal. 6 Open the paper guide and remove the misfed paper. Paper guide Be careful not to tear the misfed paper during removal. 2 Open the top cover. Top cover Move the tab in the direction of the arrow as shown in the illustration to open the top cover. 7 Close the finisher. 3 Remove the misfed paper. Be careful not to tear the misfed paper during removal. After removing the paper, press down on the top cover to close it. 4 Open the finisher. Hold the knob and open the finisher. 5 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 5-14