Sharp AR-RB1 Service Manual - Page 3

Parts included Actuator: 1 pc. Transport guide: 1 pc. 3. Remove the paper output section covers. 1) Pull the centers of the two paper output section covers on the left side of the main unit to remove them. Transport guide holder: 2 pcs. 1. Turn off the main switch of the main unit. 1) Turn the main switch located on the left side of the main unit to the "OFF" position. 2) Then remove the power plug of the main unit from the outlet. Paper output section covers In the case of AR-D17/D18: 1) Pull the lock release lever on the left side of the main unit to pull out the left cover until it stops. "OFF" 2. Remove the actuator. 1) If the exit tray is installed to the main unit, remove it. Left cover Lock release lever 2) Pull the upper part of the paper input section cover on the left side of the optional stand to remove the paper input section cover. 2) While holding the base of the exit actuator of the main unit with one hand, pull the end of the actuator with the other hand to remove the actuator. Paper input section cover Exit actuator AR-RB1 UNPACKING AND INSTALLATION 2 - 2