Sharp DX-B351PL DX-B351PL User Manual - Page 48
Network Settings
View all Sharp DX-B351PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Note: Set auto off condition: • Shutdown under no-port state (default configuration): no port is connected, printer is under standby or sleep mode. • Shutdown under idle state: the printer is under standby or sleep mode. • If auto off condition is satisfied, printer will be off at the preset time. • After printer is off, power consumption is 0.5W or lower. 7.2. Network Settings You can check or set network status via network setting. 1) Press "Menu" to enter the Menu Settings interface. 2) Press direction key "▲" or "▼" and select "3. Network Set" option and press "OK" key to set "Wired network setting". circularly accumulate values from "0-9", press direction key "▼" to circularly input the position from left to right, press "OK" key to save setting and press "Return" key to return to the previous menu. 40