Sharp ER-A320 Programmer Manual - Page 22

9) PROGRAMMING FOR %KEY %n %n Not changed ABCDEF @/FOR CA/AT A : Sign A + 0 - 1 B : Not used (Fixed at "0") C : Taxable 4 C Non taxable 0 Taxable 1 D : Taxable 3 D Non taxable 0 Taxable 1 E : Taxable 2 E Non taxable 0 Taxable 1 F : Taxable 1 F Non taxable 0 Taxable 1 MRS = 100000 Note : Current setting is displayed. 10) PROGRAMMING FOR MEDIA KEYS & FUNCTION KEYS RA PO CASH2 CHn CHK TAX Not changed AB @/FOR CA/AT A : Mantissa (0 to 9) B : Exponent (0 to.8) MRS = 18 digits (RA, PO) 18 digits (CASH2, CHn, CHK) 17 digits (TAX) Note : Current setting is displayed. When starting setting, press [TAX] key twice. 11) DATE, TIME PROGRAMMING XXXXXX DATA HHMM TIME #/TM/SBTL DATE : date entry format follows SRV Programming (6 digits) TIME : 24 hour system (4 digits) MRS = DATE : 01 - 01 - 00 TIME : 00 - 00 12) CONSECUTIVE NO. PROGRAMMING XXXX @/FOR #/TM/SBTL CONSECTIVE NO. CONSECUTIVE NO. : 0000 to 9999 (4 digits) MRS = 0001 13) TAX TABLE PROGRAMMING TAX AB @/FOR Declaration of TAX XXXXXX TAX rate @/FOR XXXX Cycle @/FOR XXX @/FOR Initial TAX XXXXX @/FOR XXXXX Lower TAX limit Break point @/FOR CA/AT 72 BREAKPOINTS CAN BE PROGRAMMED FOR EACH TAX TABLE. (Case of interval between break point is 1 dollar or more and less than 100 dollar, 36 breakpoints is programmed for each table.) DEPRESSION OF THE SBTL KEY AT THE FOLLOWING POINTS MEANS A TAX TABLE DELETE OPERATION. A : lNTERVAL BETWEEN BREAKPOINTS IS 1 DOLLAR OR MORE AND LESS THAN 100 DOLLAR = 1 lNTERVAL BETWEEN BREAKPOINTS IS BELOW 1 DOLLAR :0 B : TABLE 1 PROGRAMMING = 1 TABLE 2 PROGRAMMING = 2 TABLE 3 PROGRAMMING = 3 TABLE 4 PROGRAMMING = 4 TAX rate Cycle Initial TAX Lower TAX limit Break point 0.0000 - 99.9999% 0 - 9999 0 - 999 0 - 99999 0 - 99999 MRS = NO TAX