Sharp ER-A320 Programmer Manual - Page 23

CHAPTER 3. OP X/Z, X1/Z1,X2/Z2 MODE The following categories of reports can be printed by the ECR. 1) OP X/Z reports (individual clerk reports) 2) X1/Z1 reports (Daily sales total X and Z reports) 3) X2/Z2 reports (Periodic total X and Z reports) 1. Print report In the table below those reports marked with a circle "O" can be printed by the standard machine and those marked with an asterisk " " can be printed when the corresponding option is added. REPORT NAME GENERAL DEPT/GROUP TRANSACTION HOURLY DAILY NET PLU(RANGE) PLU(DEPT) KEY ENTRY CA/AT MDSE SBTL CHK #/TM/SBTL #/TM/SBTL PLU DPTn DPT# OP X/Z X Z MODE X1/Z1 X1 Z1 X2/Z2 X2 Z2 DATA FOR READING REMARK GROUP CODE , PLU CODE , DEPT.CODE , To read respective reports. it is necessary to follow the procedure below. Reading (X report) Reading (Z report) KEY All X Group code (1 to 9) MDSE SBTL PLU code range can be specified by entering the start and end numbers according to the following procedure. When specifying a single time interval, PLU code, the start number has only to be entered. All XXX PLU code @/FOR Single XXX End No. Reading PLU To read respective reports, it is necessary to follow the procedure below. XX Dept. code DEPT#