Sharp ER-A330 Installation Manual - Page 8

2. Installation procedure 1) Turn over the drawer bottom side and remove rubber footing at two to locations. 2) Fasten the bracket together with the rubber footing using the pand hand screw. Pay attention for the installing direction of the bracket that the pan head screw can be inserted properly into the bracket. Pan head screw Fixing bracket Rubber footing Cash drawer Fixing bracket Rubber footing Drawer bottom plate Pan head screw Fig. 1 3) Fastening on the table: Secure the fixing Bracket using the screw (Fig. 2). If the thickness of the table is less than 15mm, bore a 4.5mm hole in the table and fasten it with the screw (XBPSD40P22000 - 4pcs.) and nut (XNESD40-32000 - 4pcs.). CHAPTER 9. SHIELD PLATE KIT: DKIT-8666BHZZ (Only for ER-A330) 1. Component list No. PARTS CODE DESCRIPTION Q'TY 1 LCHSM6705BHZZ SHIELD PLATE 1 2 PGUMM6696BHZZ GUM LEG 4 3 TLABH7054BHZZ CAUTION CARD 4 4 XUBSD30P12X00 SCREW 1 5 XUBSD30P08000 SCREW 1 6 XJPSD30P12X00 SCREW 1 7 XJPSD40P12X00 SCREW 1 8 XHBSD30P08000 SCREW 3 9 LBSHC0004AGZZ CLAMP 1 2. Installation procedure 1) Remove the top cabinet. 2) Remove the bottom cabinet. 3) Install the shield plate  to the bottom cabinet and fix it with ??? screws . 4) Attach four gum legs ! to the shield plate and fix them with screws ". 5) Replace the top cabinet. 4 3 2 1 2 3 2 3 Tapping screw Fixing bracket Fig. 2 – 7 –