Sharp LC-20S4U-S LC-20S4U-S Operation Manual - Page 12

Part Names of Main Unit Controls Upper control panel CH (Channel) ( )/( ) INPUT VOL (Volume) (-)/(+) MENU POWER How to adjust the angle Tilt the display by grabbing onto the carrying handle while securely holding down the stand with your other hand. To change the vertical angle of the LCD TV set, tilt the screen up to 2.5 degrees forward or 10 degrees backward. The LCD TV set can also be rotated up to 25 degrees to right and left. Please adjust the angle so that the LCD TV set can be watched most comfortably. Speaker OPC (Optical Picture Control) sensor HEADPHONE jack Plug the headphone mini-plug into the Headphone jack located on the front of the main unit. OPC indicator (Optical Picture Control) The OPC indicator lights up green when "OPC" is set to "ON". (See page 21.) Remote sensor POWER/WAKE UP TIMER indicator A The POWER/WAKE UP TIMER indicator lights up green when the power is on, and red when in the standby mode (the indicator will not light when the main power is off), and orange when the wakeup timer is set (the indicator will light when in the standby mode). • INPUT, CH ( )/( ), VOL (-)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control. Listening with Headphones ■ Plug the headphone mini-plug into the HEADPHONE jack located on the front of the main unit. ▼ On-screen display VOLUME 20 Headphones Adjust the sound volume using VOL on the remote control. A • Headphones are not included in the supplied accessories. • No sound is heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack. • Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. 11