Sharp LC-20S4U-S LC-20S4U-S Operation Manual - Page 25
Useful Features, CH-SETTING - 20 lcd
UPC - 074000362802
View all Sharp LC-20S4U-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Useful Features CH-SETTING ■ EZ SETUP When you move to an area with different broadcasting signals, you may have to set the channel numbers and the time with the EZ SETUP function. To activate EZ SETUP, perform the following procedures. 1 Press '/" to select "CH-SETTING" in the SETUP screen (see page 20) and press ENTER. 2 Press '/" to select "EZ SETUP", and press ENTER. 3 Press '/" to select "YES", and press ENTER. Refer to page 14 for more information on EZ SETUP. ■ Setting the AIR/CABLE It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. ■ Saving broadcast TV channels in the memory 1 Repeat steps 1 to 3 of Setting the AIR/CABLE. 2 Press '/" to select "CH SEARCH", and press ENTER. EZ SETUP AIR/CABLE CABLE 1 CH SEARCH CH MEMORY 3 Press ENTER. The tuner will search through all available channels in your area and add them to the TV memory. 2 1 Press MENU to display the Menu screen. 2 Press \/| to select "SETUP". 3 Press '/" to select "CH-SETTING", and press ENTER. 4 Press '/" to select "AIR/CABLE", and press ENTER. Press '/" to select desired setting, and press ENTER. EZ SETUP AIR/CABLE CH SEARCH CH MEMORY AIR CABLE STEREO SAP MONO A • To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will stop at the current channel and will not add any higher channels. ■ Adding weak or additional channels or erasing unwanted channels from TV memory Individual settings of programs can be adjusted. 1 Repeat steps 1 to 3 of Setting the AIR/CABLE. 2 Press '/" to select "CH MEMORY", and press ENTER. EZ SETUP AIR/CABLE CHANNEL AIR 2 CH SEARCH SKIP ON CH MEMORY 5 Press MENU to exit. A • Receivable channels of your LCD TV set are: AIR channels: CABLE channels: VHF: 2 through 13. 1 (HRC and IRC) UHF: 14 through 69. 2 through 125 (STD, HRC and IRC) 3 Press '/" to move the cursor to "CHANNEL", and use \/| or Channel Select to select each desired channel to add or erase. 4 Press '/" to move the cursor to "SKIP", and use \/| to select "ON" or "OFF". 5 Press MENU to exit. A • If CH SEARCH is performed again, the previously memorized channels will be lost. 24