Sharp LC-20S4U-S LC-20S4U-S Operation Manual - Page 18

Basic Operation Turning On and Off the Main Power POWER Switching the Input Modes (INPUT1/ INPUT2/INPUT3/TV) 1 Turn on the power of the connected video equipment. 2 Press INPUT to select the applicable input source. The screen changes in order of INPUT1, INPUT2, INPUT3 and TV mode each time INPUT is pressed. INPUT 1 (COMPONENT) mode INPUT1 480P POWER/WAKE UP TIMER indicator ● Press POWER. The POWER/WAKE UP TIMER indicator instantly changes from red to green and the LCD TV set is turned on. 2 On-screen display STEREO SAP MONO 11:53AM A • The On-screen display disappears after a few seconds. ● To turn off the main power, press POWER again. Standby To turn off the LCD TV set Press POWER. The POWER/WAKE UP TIMER indicator will turn red. To turn the LCD TV set back on Press POWER again. The POWER/WAKE UP TIMER indicator will turn green. INPUT 2 mode INPUT2 INPUT 3 mode INPUT3 TV mode 2 A • INPUT1: Used for video equipment connected to the COMPONENT input terminals. • INPUT2: Used for video equipment connected to the INPUT2 input terminals. The S-video input terminal is additionally provided for the INPUT2 terminal. If both the S-video terminal and normal video terminals are connected with cables, the S-video input terminal takes priority. • INPUT3: INPUT3 mode is used to adjust the preset settings and IN or OUT can be selected. INPUT3 indication is not displayed when OUT is selected. (For details on setting INPUT3 SELECT, see page 25.) 17