Sharp LC-60LE810UN Service Manual - Page 68
] LED flashing specification at the time of an error Center icon LED used - trouble
UPC - 074000372580
View all Sharp LC-60LE810UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
LC-40/46/52/60LE810UN (1st Edition) Trouble Shooting Panel Module When C-S FPC(2 pieces) is replaced, does screen display normally? YES Replace C-S FPC(2 pieces). NO When C-PWB is replaced, does screen display normally? YES Replace C-PWB. (Adjust "VCOM ADJ" after replace C-PWB) NO Replace Panel HIRAKI. (Adjust "VCOM ADJ" after replace Panel HIRAKI) [2] LED flashing specification at the time of an error (Center icon LED used) 1. Display method • Since only the center icon LED can be used, slow flashing and fast flashing are combined. • Refer to Table 1. • The Start from the detail display. (No outline display) • After recovering from an error, if the same error cannot be generated again, refer to MONITOR ERR CAUSE on the process screen. • During version upgrade, the brightness of the flashing LED changes smoothly. • When completing version upgrade, the brightness of the LED changes in a staircase pattern. 2. LED flashing method Error flashing Center icon ON OFF 1600ms 1600ms 400ms 400ms 300ms 100ms • Flashing during Verup Center icon ON OFF 500ms 500ms • Flashing when completing Verup Center icon ON OFF 1000ms 1000ms 1000ms 1000ms 6 - 14