Sharp LC-70LE660U Operation Manual - Page 45
ENG 4-12
View all Sharp LC-70LE660U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
On-Screen Display Menu Example Initial Setup (Continue) Input Settings HDMI auto view When you view images sent from external equipment in an HDMI connection, this function allows the image size on the TV to automatically switch to an appropriate one. NOTE Refer to your external equipment operation manual for the signal type. Digital Audio Output You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. PCM: For connecting to equipment that does not support Dolby Digital and DTS. The same audio (main, sub, or main/sub) as the audio of the program being viewed is output. 2-channel audio with a sampling rate of 48 kHz or less is output as linear PCM audio. Bitstream: For connecting to an audio system that supports Dolby Digital and DTS. Audio is output through both the main and sub channels. NOTE Analog channel audio and video input audio are output in PCM mode even when "Bitstream" is selected. PCM digital input signals are output in PCM mode even when "Bitstream" is selected. Audio Select This function sets the terminal to output the computer audio. The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. To perform the operation, refer to "Initial Setup" > "Input Settings" > "Audio Select". (See page 7-2.) Output Select Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL+/- on the remote control unit or on the TV. Sound via the AUDIO OUT terminal is not adjustable and outputs at a consistent level. Variable: Sound via the AUDIO OUT terminal is adjusted with VOL+/- on the remote control unit or on the TV. Sound via speaker is muted. Input Select For image input applied to the COMPONENT IN or VIDEO IN terminal, switch to "COMPONENT" or "VIDEO", respectively. COMPONENT: Select component video VIDEO: Select composite video. NOTE If no (color) image display, try changing to another signal type. Check the operation manual of the external equipment for the signal type. Input Skip This setting allows you to skip the TV, HDMI or PC IN Input ("TV, PC IN, COMPONENT, HDMI 1, HDMI 2, HDMI 3 and VIDEO") on the Input Selection operation. NOTE If you connect external equipment to an HDMI IN terminal which you have set to be skipped, a notification message appears on the display when a signal is received from the connected external equipment. Press "Yes" to reset the related skipping setting so that the input terminal becomes available. ENG 4-12