Sharp LC32SH130K Operation Manual - Page 13

To cancel an already set reminder, highlight that programme and press the OK button. Then select "Delete Timer" option. The timer will be cancelled. Note: It is not possible to record or set timer for two or more individual events at the same time interval. First Time Installation IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation. • When the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed: • Use " " or " " buttons to select your language and press OK button to set selected language and continue. • After selecting the language, "Welcome!" screen will be displayed, requiring you to set Country,Teletext Language and Scan Encrypted options. Note: You can press "MENU" button to cancel. IMPORTANT! If you are located at a TV regional border or are able to receive broadcasts from more than one transmitter the "Choose Region" OSD will be displayed after the digital channels have been scanned. To prevent poor quality pictures or unwanted regional variation from being stored in your main channel list you MUST! select your preferred regional options for each level where available, move the cursor to each option and press the Left/right arrow keys to view the available regions/transmitters. The example below shows "UK" "England" "North West" have been selected as the regional options, after OK is pressed they can only be changed if "First time installation" is repeated. Received regional variations from the non selected region/transmitters will be stored from preset 800. • By pressing " " or " " button, select the country you want to set and press " " button to highlight Teletext Language option. Use " " or " " button to select desired Teletext Language. • Press " " button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations.Afterwards select the desired Teletext Language. • Press OK button on the remote control to continue and the following message will be displayed on the screen: After all the available stations have been stored a channel list will be shown based on the broadcaster LCN press OK to accept this channel order and start viewing or use the Edit functions to change the order or delete unwanted channels. • Press OK button to quit channel list and watch TV. To select the "Yes" or "No" option, highlight the item by using " " or " " buttons and press OK button. Afterwards, the following OSD will be displayed on the screen and the digital television will search for digital terrestrial TV broadcasts. English - 12 -